HP 2566C User Manual
Page 120
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
problems, 7-2
recommended paper, 1-5
related manuals, 1-2
remote character set selection, 5-4
reset, 6-12
ribbon fabric, C-1
ribbon ink specifications, C-1
ribbon jam problems, 7-5
run-time errors, 7-6
secondary character set selection, 5-3
selecting difficult forms mode, 5-4
selecting horizontal graphics density, 5-4
selecting page length, description, 5-4
selecting perforation skip, 5-5
selecting vertical line spacing Gines-per-
inch), 5-5
self-test, description, 5-7
self-test, error numbers, 7-7
self-test, failui|e, 7-6
self-test, how to run, 5-7
service agreements, 1-6
set lines-per-inch, 3-28
set lines-per-page, 3-29
SET T.O.F. key, 6-5
standard self-test, 5-7
status code 2, 7-3
status code table, 6-2
status mode, 6-2
sub-test selection, 5-8
supplies, 1-5
temperature specifications, A-7
test failure, 5-9
TEST key, 6-6
Top of Form Alignment Guide Labels, 3-33
tractor control keys, description, 6-9
tractor control knob, description, 6-8
troubleshooting problems, 7-2
turn perforation skip “OFF,”, 3-27
turn perforation skip “ON,”, 3-27
vertical forms control channels, A-7
vertical forms control (VFC), 6-13
vertical paper tension lever, description, 6-8
weight, withoht powered paper stacker, A-3
weight, with powered paper stacker, A-3
width, without powered paper stacker, A-3
width, with powered paper stacker, A-3
Print quality, 3-24
character scrunch, 7-4
optimizing, 6-14
problems, 7-3
Print speeds
HP2566C, A-5
HP2567C, A-6
Problems
calling for help, 7-8
rinding the fail point number, 7-8
general, 7-2
paper feed, 7-2
paper tearing or separating, 7-2
power-on, 7-2
printer will not print, 7-3
print quality, 7-3
Product description, 1-2
Product options, 1-2
Recommended paper for printer, 1-5
Related manuals, 1-2
Remote character sets, selection, 5-4
Removing the ribbon, 3-1
Replacing the ribhon, 3-5
Reset, 6-12
Ribbon
fabric, C-1
ink specirications, C-1
jam, 7-5
ordering, 1-5
overall dimensions, C-1
part number, 1-5
removal, 3-1
remove spool, 3-3
replacement, 3-5
Run-time errors
contact service representative, 7-6
list, 7-6
Safely, printer, 1-6
Secondary character sets, selection, 5-3
Selecting character sets, 5-3
Selecting sub-tests, 5-8
Self-test
continuous, 5-8
description, 5-7
error numbers, 7-7
failure, 7-6
how to run, 5-7
standard, 5-7
Service calls, 7-8
Service, printer, 1-6
Setting HP-IB address, 5-6
SET T.O.F. Key, 6-5
Set-up, powered paper stacker, 4-1
Shipping, paper, 2-6
Specialty forms specirications, B-3
Standard self-test, 5-7
Standard VFC, 6-13
Status code 2, 7-3
Status code table, 6-2
Status mode, printer, 6-2
Index-5