To check the setting, To cancel the timer operation, Timer-recording radio programs – Sony DHC-MDX10 User Manual
Page 71: Insert a recordable md or tape, 3 press clock/timer set
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To check the setting
Press TIMER SELECT and turn the jog dial to
select the respective mode (DAILY 1 or
DAILY 2), then press ENTER/YES.
To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select "TIMER OFF", then press ENTER/YES.
Tip
The power turns on 15 seconds before the preset
time.
Timer-recording radio
programs
To timer-record, you must preset the radio
station (see "Step 3; Presetting radio
stations") and set the clock (see "Step 2:
Setting the time") beforehand.
7
TIMER
^
SELECT ■
T
(D
9
fit
(D
VI
■ Insert a recordable MD or tape.
If tape, insert it into deck B.
2
Tune in the preset radio station (see
"Listening to the radio").
In the case that you record from an
optional component that is cormected to
OPTICAL IN terminal, set it's timer as
well. See an appropriate operating
instruction of each component.
3
Press CLOCK/TIMER SET.
"SET DAILY 1" appears.
continued
71