Sony DHC-MDX10 - Manual (Page 15)

2
Press CD = and place a CD.
Then press again to close the disc tray.
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
3
Press DISC SKIP / EX-CHANGE
repeatedly so that it lights green.
4
Press CD-TAPE SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B ► (for front side)
lights up.
5
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
Playing an MD
— Normal play
POWER SAVE
OB
fil
w
ili
? %
«Mt
O
■i
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing
CD-TAPE SYNC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing
CD-TAPE SYNC.
Note
You cannot listen to other sources while recording.
■ Insert a recorded MD.
Insert the MD until the deck pulls it in.
When ^ is lit in the display, another
MD has been inserted already. Press
MD ^ to eject an MD and then insert a
recordable MD if necessary.
With the arrow
pointing toward
the deck.
With the label
side up and the
shutter slide
rightward.
continued
15