Sony DHC-MDX10 - Manual (Page 35)

Recording your
favourite CD tracks
-CD-MD Synchro Recording
You can select your favorite CD tracks with
the Programme Play feature, then record the
programme on an MD using the CD Synchro
Recording feature.
l/(!)
(Power)
7 6 3 8
1 Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD on the disc tray.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears.
3
Press one of the Disc 1~3 buttons to
select a CD.
4
Turn the jog dial until the desired
track appears in the display, then
press ENTER/YES.
The track is programmed.
5
To programme additional tracks,
repeat step 3 and 4.
The total playing time of the programme
appears. You can make a programme of
up to 32 tracks.
6
Insert a recordable MD.
7
Press CD-MD SYNC.
The MD deck stands by for recording
and the CD is in pause for playback.
If you use an MD with tracks already
recorded on it, the MD deck
automatically locates the end of the
recorded portion and starts the new
recording from there.
8
Press MD ►!! .
Recording starts from the last recorded
portion of the MD. The CD player and
the MD deck stop automatically when
the recording is completed.
To stop recording
Press ■ .
If the MD ends while recording
The MD and the CD automatically stop.
Note
If the MD is record protected, "Cll" and
"Protected" appears in the display alternately and
the MD cannot be recorded on. Press MD = and
remove the MD, slide the record protection tab to
the closed position (see page 34), reinsert the MD
and try again.
ft
0
3
IQ
O
3
(U
3
s
o
35