Recording a cd by specifying track order – Sony DHC-MDX10 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a CD by
specifying track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
|/
(Power)
1 11
2 10 "
5
9
1
1
Place CDs and insert a blank tape
into deck B.
i2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
4
Press one of the DISC 1~3 buttons to
select a CD.
5
Turn the jog dial until the desired
track appears in the display, then
press ENTER/YES.
The track is programmed
Disc number
...... Cl
i :/:i :■■■!■■■
■...' Vi'. -J o~"j.
±-
Track number Total playing time
(including selected
track)
6
To program additional tracks to be
recorded on side A, repeat steps 4 to
5.
Skip step 4 to select tracks from the same
disc.
Press II on the remote to insert a
pause at the end of side A.
"P" appears in the display and the total
playing time resets to "0.00" in the
display.
8
Repeat steps 5 and 6 for tracks from
the same disc or steps 4 to 5 for
tracks from another disc to program
the remaining tracks to be recorded
on side B.
56