Sony DHC-MDX10 - Manual (Page 14)

Recording a CD on an MD
(continued)
To Do this
Stop recording Press ■ .
Remove CD Press ^ for CD or MD.
or MD
Tip
If you use a recorded MD, the MD deck
automatically locates the end of the recorded
portion and starts recording from there. To record
after erasing all tracks on an MD, see "Erasing
recordings" on page 46,
While "TOC" is lit or is flashing
To ensure complete recording, do not move
the deck or disconnect the mains lead. The
deck updates the Table of Contents (TOC)
while "TOC" is flashing.
Notes
• If the MD is record protected, "Cll" and
"Protected" appears in the display alternately and
the MD cannot be recorded on. Press MD = and
remove the MD, slide the record protection tab to
the closed position (see page 34), reinsert the MD
and try again.
• You cannot make CD synchro recordings on an
MD and a tape simultaneously.
Recording a CD to a
tape
— CD-TAPE Synchro Recording
The CD-TAPE SYNC button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (Cr02) tapes. The
recording level is adjusted automatically.
l/(!)
(Power)
2 CD
► I I
1 Press and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
14