To stop recording, To cancel automatic track marking, Note – Sony DHC-MDX10 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
While in record pause, press
MENU/NO twice.
"Setup Menu" appears.
2
Turn the jog dial until "T. Mark Off"
appears, then press ENTER/YES.
3
Turn the jog dial until "T. Mark L
Sync" appears, then press ENTER/
YES.
"L-SYNC" lights up.
4
Press MENU/NO.
To stop recording
Press ■.
To cancel automatic track marking
1
while in record pause, press MENU/NO
twice.
"Setup Menu" appears.
2
Turn the jog dial until "T. Mark L Sync"
appears, then press ENTER/YES.
3
Turn the jog dial until "T. Mark Off"
appears, then press ENTER/YES.
4
Press MENU/NO.
"L-SYNC" disappears.
When "L-SYNC" goes off, a track number is
marked only at the beginning of each
recording.
Note
The track numbers are not marked even if the
level-synchro recording is set to on, if the
noise increase while recording from radio or
tape
Marking track numbers at
a specific point while
recording
- Track mark
You can mark track numbers at any time
while recording, regardless of the type of
sound source.
I/C!)
(Power) REC
Press REC while recording at the
point you want to add a track mark.
A track mark is added that location.
30
n
n
0
a
HI
3
IS
0
3
3
s
D
41