Sony DHC-MDX10 - Manual (Page 40)

starting recording with 6 seconds of
prestored audio data (continued)
1 Insert a recordable MD.
2
Press FUNCTION repeatedly until
the source (e.g., TUNER) you want
to record appears in the display.
3
Press REC.
The deck stands by for recording.
4
Start playing the source you want to
record.
5
Press ENTER/YES at the point you
want to start recording.
Recording of the source starts with the
6 seconds of audio data stored in the
buffer memory.
If you use a recorded MD, the MD deck
automatically locates the end of the
recorded portion and starts recording
from there.
To stop Time Machine Recording
Press ■.
Marking track
numbers
The track numbers can be marked as follows:
• Mark the track numbers automatically.
When you record from this system's CD
(digital recording) or during level-synchro
recording, the track numbers are
automatically marked.
• At any point while recording.
You can mark the track numbers while
recording any sources.
• After recording.
You can use Divide function (see page 50).
Marking track numbers
automatically while
recording
— Level-Synchro Recording
The "LEVEL-SYNC" is factory set to on and
the track numbers are automatically marked.
If "L-SYNC" is not displayed during
recording, turn it on as follows. Track
numbers are automatically marked when the
input signal is under a certain level for more
than two seconds and then exceeds the
previous level.
I/C!)
(power)
40 1,4 2,3