Sony DHC-MDX10 - Manual (Page 19)

To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or - (►► or
on the remote) repeatedly. For automatic
tuning, press and hold + or - (►► or ◄◄ on
the remote).
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play). When the
system is in the Power Saving Mode, the One
Touch Play function does not work.
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO / MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Recording from the
radio on an MD
You can make an analogue recording from a
radio on an MD.
l/(!) ^
(Power) MD
w
me*
fi
O
5
NMI«
o
3
0
5 2
t Insert a recordable MD.
Insert the MD until the deck pulls it in.
When ^ is lit in the display, another
MD has been inserted already. Press
MD ^ to eject an MD and then insert a
recordable MD if necessary.
With the arrow
pointing toward
the deck.
With the label
side up and the
shutter slide
rightward.
\ ...................... . ,N.
o o o ^
□ '=§=> ^
'ISL 1 ri
2
Press TUNER / BAND repeatedly
until the band you want appears.
continued
19