Sony DHC-MDX10 - Manual (Page 68)

Labelling preset radio
station
You can label each preset radio stations with
up to 12 characters (Station Name). The
station name appears when you tune in the
station.
l/(!)
(Power)
8 6
I Press TUNER/BAND repeatedly
until the desired band appears.
2
Turn the jog dial to select the preset
number of the station you want to
label.
3
Press NAME EDIT / CHAR.
The cursor starts flashing.
Press NAME EDIT/CHAR
repeatedly until the type of
character you want appears.
Each time you press the button, the
display changes as follows:
A (Upper case) —► a (Lower case)
—► 0 (Numbers) —► ! (Symbols)’^
—► uj (Space)’^’^ —*• A...
You can use the following symbols.
** To enter a space
Go to step 6.
You cannot label a blank space from
the first letter.
5
Turn the jog dial until the desired
character appears.
6
Press
The cursor shifts rightward and waits for
the input of the next character.
7
Repeat steps 4 to 6 to complete the
entire title.
If you made a mistake
Press or ►► until the character you
want to change flashes, then repeat steps
4 to 6.
To erase the character
Press CLEAR while the character is
flashing.
8 Press ENTER/YES to complete the
labelling procedure.
68