Sony DHC-MDX10 - Manual (Page 55)

Recording on a tape
manually
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
l/(!)
(Power) DOLBY NR
3,5
1
2
Insert a blank tape into deck B.
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
• CD; Insert a CD. To start from a
specific track, create a program (See
"Programming CD tracks").
• MD; Insert a MD. To start from a
specific track, create a program (See
"Programming MD tracks").
• Tape; Insert a tape with the side you
want to play facing forward.
• Radio; Tune in the preset station you
want (See "Step 3; Presetting radio
stations").
When you want to record from optional
AV components, see "Optional AV
components".
3
Press REC PAUSE/START.
Deck B stands by for recording. The
indicator on TAPE B ► (for front side)
lights up.
4
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
5
Press REC PAUSE/ST ART.
Recording starts.
6
Start playing the source to be
recorded.
To Press
Stop recording ■.
Pause recording REC PAUSE / START.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing
REC PAUSE/START in step 3.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing REC
PAUSE/START in step 3.
• When recording from a CD, you can use the jog
dial to select tracks during rec pause mode (after
pressing REC PAUSE/START in step 3 and before
pressing REC PAUSE/START in step 5).
• Select SURROUND OFF during recording.
90
m
n
0
3
ifi
0
3
fit
fil
■o
(D
55