Sony DHC-MDX10 - Manual (Page 37)

4
Press MD ►! I (or MD ► on the
remote).
Recording starts.
5
Start playing the source you want to
record.
To stop recording
Press ■.
Tips
• When you press FUNCTION while recording
from a CD, both CD and MD stop.
• "OVER" lights up when a high-level signal was
input during recording from the component
connected to VIDEO.
• You can check the remaining time in the display
while recording by pressing DISPLAY .
Note
If you pause recording during CD recording, a track
number is recorded at that point.
Monaural recording
You can record the stereo signals of an FM
stereo broadcast etc. in monaural signals. In
the monaural recording, the recording time
becomes twice (120 minutes with an MD of
60-minutes) the normal recording time (stereo
recording).
1/(1)
(Power)
73
(D
n
0
S.
5'
ifi
0
3
fil
3
S
Q
1 Press FUNCTION repeatedly until
MD appears in the display.
2
Press MENU / NO twice.
"Setup Menu" appears.
3
Turn the jog dial until "Stereo Rec"
(or "Mono Rec" appears then press
ENTER/YES.
4
Turn the jog dial until "Mono Rec"
appears then press ENTER/YES.
continued
37