Sony DHC-MDX10 - Manual (Page 54)

Recording on a tape
Recording from a
tape to a tape
— High-speed Dubbing
You can use TYPE I (nornaal) or TYPE II
(Cr02) tapes. The recording level is
automatically adjusted.
l/(!) ^
(Power) DOLBY NR ■ ^
3
Press DIRECTION repeatedly to
select to record on one side.
Select C723 (or RELAY) to record on
both sides.
4
Press REC PAUSE/START.
Dubbing starts.
To stop dubbing
Press ■.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to CZ13 when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
2 1
1 Press ^ and insert a recorded tape
in deck A and a blank tape in deck
B.
With the side
you want to
play/record
facing forward
2
Press HI-DUB.
Deck B stands by for recording.
54