Sony DHC-MDX10 - Manual (Page 16)

Playing an MD (continued)
2
Press MD
remote).
Play starts.
'll (or MD ► on the
CISC i-sr«c
P/D 1
Ovh \As
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (Cr02) or TYPE IV (metal),
since the deck automatically detects the tape
type. You can also use the jog dial's AMS*
functions to quickly search for songs you
want to hear. To select either deck A or B,
press DECK A ► or DECK B ► on the
remote.
To Do this
Stop play Press ■ .
Pause Press MD ►II (or II on the
remote). Press again to
resume play.
Select a track Turn the jog dial (or press
on the remote)
repeatedly until you find the
desired track.
Find a point in Press and hold ◄◄ or
a track during play and release it at
the desired point.
Remove MD Press MD = .
Adjust the Turn VOLUME (or press
volume VOL+/- on the remote).
l/cb
(Power)
Jog Dial
Tips
• You can start playing from the desired track in
step 2.
1 Turn the jog dial (or press /►►! on the
remote) repeatedly until the desired track
appears in the display.
2 Press MD ►'ll .
• You can switch from another source to the
MD and start playing an MD by pressing MD
►II (or MD ► on the remote) (Automatic
Source Selection).
Note
Please do not use MDs with labels that are
protruding or labels that have not been positioned
correctly. Use of such MDs may damage this unit.
16
DECK A I
DECK B I
VOL +/-