Listening to the radio, Preset tuning – Sony DHC-MDX10 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Listening to the radio

— Preset Tuning

Preset radio stations in the tuner’s memory
first (see "Step 3: Presetting radio stations").

TUNER/BAND

VOL +/-

Press TUNER / BAND repeatedly

until the band you want appears in
the display.

The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.

Every time you press the button, the
band changes as follows:

2 band model;

FM+-+AM

3 band model:

FM -> MW -> SW

t_______ 1

Turn the jog dial (or press or

►W on the remote) to tune in the
desired preset station.

Turn counter
clockwise

(or press
on the remote)

for lower preset

numbers.

Turn clockwise

(or press
on the remote)

for higher

preset numbers.

Preset number* Frequency

S1»t0 I

TUHeo I

When only one station is preset, "ONE
PRESET" appears in the display.

Do this

Turn off the radio

Press

I / (!).

Adjust the volume

Turn VOLUME (or press
VOL +/ - on the remote).