Sony DHC-MDX10 - Manual (Page 6)

Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type ®
Extend the FM lead
AM loop antenna hori^tally.
step 1: Hooking up the system
(continued)
Jack type (g)
AM loop antenna
Extend the FM lead
antenna horizontally.
For models with a voltage selector,
set VOLTAGE SELECTOR to
position of your local power line
voltage.
VOLTAGE SELECTOl^
220-240V
110-120V
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press | / (!), the
system turns on and the demonstration
automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from
the plug (only for model equipped with
an adaptor).
To connect optional components
See page 73.
To deactivate the demonstration
When you set the time (see "Step 2: Setting
the time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY while the system is
off.