Dell Latitude Xpi CD - Manual (Page 83)

Factory Repair Parts A-1
Appendix A
Factory Repair Parts
T
his appendix provides procedures for removing and replacing factory com-
ponents and subassemblies at a service facility. (Dell does not recommend
removal and replacement of factory components and subassemblies in the field.
For removal and replacement procedures for field-replaceable parts, see Chap-
ter 4, “Removing and Replacing Parts.”)
R
ecommended Tools
Most of the procedures in this appendix require the use of one or more of the
following tools:
• Small flat-blade screwdriver
• Jeweler’s screwdriver set
• Number 1 magnetized Phillips-head screwdriver
• Number 2 magnetized Phillips-head screwdriver
• Chip-removal tool
• Wrist grounding strap
• Small plastic scribe
• Nut drivers
P
recautionary Measures
Before you begin working on the computer, read about the precautionary mea-
sures, screw identification, and computer orientation outlined at the beginning
of Chapter 4, “Removing and Replacing Parts.”
F
actory Repair Parts and Assemblies
Table A-1 lists the factory repair parts and assemblies available for the com-
puter. The subsections that follow Table A-1 provide instructions for removing
and replacing these parts and assemblies.