Dell Latitude Xpi CD - Manual (Page 69)

Removing and Replacing Parts 4-31
Diskette/CD-ROM Drive Assembly
Figure 4-23. Diskette/CD-ROM Drive Assembly Removal
To remove the diskette/CD-ROM drive assembly, follow these steps:
1. Remove the palmrest assembly.
2. Remove screws D1 and D2 securing the diskette/CD-ROM drive assem-
bly to the bottom case assembly.
3. Lift the back of the drive assembly slightly, and then slide the drive
assembly toward the back of the computer about 1/4 of an inch
Part or Assembly Name Order Name
Diskette drive assembly SVC,ASSY,FD,LXPiCD
CD-ROM drive assembly SVC,ASSY,CDROM,LXPiCD
diskette drive
CD-ROM drive
connector JCDROM
connector JFLOP
D1 (4 mm)
D2 (4 mm) 4 mm
D3 (2 mm)
D4 (2 mm)
D5 (2 mm)
D6 (2 mm)
2 mm
CD-ROM flex cable
bracket
bottom case assembly
tab
D7 (2 mm)
D8 (2 mm)
D9 (2 mm)
plastic flip lock