Dell PowerEdge R415 - Manual (Page 9)

About Your System 9
1
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
Keystroke Description
Enters the System Setup program. See "Using the System Setup
Program and UEFI Boot Manager" on page 57.
Enters System Services, which opens the Lifecycle Controller.
The Lifecycle Controller allows you to access utilities such as
embedded system diagnostics. For more information, see the
Lifecycle Controller documentation at support.dell.com/manuals.
Enters the BIOS Boot Manager or the UEFI Boot Manager,
depending on the system’s boot configuration. See "Using the System
Setup Program and UEFI Boot Manager" on page 57.
Starts PXE boot.
Enters the Baseboard Management Controller (BMC) or iDRAC6
Configuration Utility, which allows access to the System Event Log
(SEL) and configuration of remote access to the system. For more
information, see the BMC or iDRAC user documentation at
support.dell.com/manuals.
Enters the SAS Configuration Utility. For more information, see the
SAS adapter documentation at support.dell.com/manuals.
Enters the PERC configuration utility. For more information, see the
PERC card documentation at support.dell.com/manuals.
Enters the utility to configure NIC settings for PXE boot. For more
information, see the documentation for your integrated NIC at
support.dell.com/manuals.
R415HOM.book Page 9 Friday, September 24, 2010 9:37 AM