Dell PowerEdge R415 - Manual (Page 113)

Installing System Components 113
Figure 3-18. Installing or Removing an iDRAC6 Express Card
Installing an iDRAC6 Express Card
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that
came with the product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 82.
3 Insert the notch on the iDRAC6 Express card into the clip on the system
board.
1 iDRAC6 Express card 2 notch
3 clip 4 plastic standoff tab
1 2
3
4
R415HOM.book Page 113 Friday, September 24, 2010 9:37 AM