Dell PowerEdge R415 - Manual (Page 61)

Using the System Setup Program and UEFI Boot Manager 61
Memory Settings Screen
Processor Settings Screen
Report Keyboard
Errors
(Report default)
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error messages
relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard itself if
a keyboard is attached to the system.
F1/F2 Prompt on
Error (Enabled
default)
Enables the system to halt on errors during POST, which allows
the user to observe events that may scroll by unnoticed during
normal POST. The user can press to continue or
to enter the System Setup program.
CAUTION: On setting this option to Disabled, the system
does not halt if an error occurs during POST. Any critical
errors are displayed and logged in the system event log.
Option Description
System Memory Size Displays the amount of system memory.
System Memory Type Displays the type of system memory.
System Memory Speed Displays the system memory speed.
Video Memory Displays the amount of video memory.
System Memory Testing
(Enabled default)
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
Redundant Memory
(Disabled default)
Specifies whether redundant memory is enabled on the
system. Options are Spare Mode and Disabled.
Node Interleaving
(Disabled default)
If this field is Enabled, memory interleaving is supported
if a symmetric memory configuration is installed.
Option Description
64-bit Specifies if the processor(s) support 64-bit extensions.
Clock Speed Displays the processor clock speed.
Bus Speed Displays the processor bus speed.
Option Description
R415HOM.book Page 61 Friday, September 24, 2010 9:37 AM