Dell PowerEdge R415 - Manual (Page 120)

120 Installing System Components
3 To disconnect the RAID battery cable from the connector on the system
board, press the tab on the RAID battery cable connector, and gently
pull the cable connector out of the connector on the system board.
See Figure 3-21.
4 Pull back gently on the two tabs holding the RAID battery and lift the
RAID battery from the battery carrier. See Figure 3-21.
Figure 3-21. Removing and Installing the RAID Battery
1 RAID battery 2 battery cable connector
3 battery carrier tab (2) 4 battery carrier
3
2
4
1
R415HOM.book Page 120 Friday, September 24, 2010 9:37 AM