Dell PowerEdge R415 - Manual (Page 66)

66 Using the System Setup Program and UEFI Boot Manager
Embedded Server Management Screen
Failsafe Baud Rate
(115200 default)
Displays the failsafe baud rate used for console
redirection. BIOS attempts to determine the baud rate
automatically. This failsafe baud rate is used only if the
attempt fails. This rate should not be adjusted.
Remote Terminal Type
(VT100/VT220 default)
Sets the remote console terminal type, either
VT100/VT220 or ANSI.
Redirection After Boot
(Enabled default)
Enables or disables BIOS console redirection when the
operating system is loaded.
Option Description
Front Panel LCD
Options
Options are User Defined String, Model Number, or None.
If the LCD Home screen is set to an option other than these
three choices, the option will be displayed as Advanced in the
BIOS. In this event, the option cannot be changed in the BIOS
unless it is changed back to User Defined String, Model
Number, or None through another LCD configuration utility
(such as the iDRAC6 Configuration Utility or the LCD panel
menu).
User-Defined
LCD String
You can enter a name or other identifier for the system, to be
displayed on the LCD module screen.
Option Description
R415HOM.book Page 66 Friday, September 24, 2010 9:37 AM