Dell POWEREDGE M1000E - Manual (Page 865)

36-79
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 36 Configuring QoS
Displaying Standard QoS Information
show policy-map [policy-map-name [class
class-map-name]] Display QoS policy maps, which define classification criteria for
incoming traffic.
Note Do not use the show policy-map interface privileged
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
show running-config | include rewrite Display the DSCP transparency setting.
Table 36-15 Commands for Displaying Standard QoS Information (continued)
Command Purpose