Dell POWEREDGE M1000E - Manual (Page 28)

Contents
xxviii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
C H A P T E R
34 Configuring Network Security with ACLs 34-1
Understanding ACLs 34-1
Supported ACLs 34-2
Port ACLs 34-3
Router ACLs 34-4
VLAN Maps 34-5
Handling Fragmented and Unfragmented Traffic 34-5
ACLs and Switch Stacks 34-6
Configuring IPv4 ACLs 34-7
Creating Standard and Extended IPv4 ACLs 34-8
Access List Numbers 34-8
ACL Logging 34-9
Creating a Numbered Standard ACL 34-10
Creating a Numbered Extended ACL 34-11
Resequencing ACEs in an ACL 34-15
Creating Named Standard and Extended ACLs 34-15
Using Time Ranges with ACLs 34-17
Including Comments in ACLs 34-19
Applying an IPv4 ACL to a Terminal Line 34-19
Applying an IPv4 ACL to an Interface 34-20
Hardware and Software Treatment of IP ACLs 34-22
Troubleshooting ACLs 34-22
IPv4 ACL Configuration Examples 34-23
Numbered ACLs 34-25
Extended ACLs 34-25
Named ACLs 34-26
Time Range Applied to an IP ACL 34-26
Commented IP ACL Entries 34-27
ACL Logging 34-27
Creating Named MAC Extended ACLs 34-28
Applying a MAC ACL to a Layer 2 Interface 34-29
Configuring VLAN Maps 34-30
VLAN Map Configuration Guidelines 34-31
Creating a VLAN Map 34-32
Examples of ACLs and VLAN Maps 34-33
Applying a VLAN Map to a VLAN 34-35
Using VLAN Maps in Your Network 34-35
Denying Access to a Server on Another VLAN 34-35