Dell POWEREDGE M1000E - Manual (Page 117)

4-9
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 4 Configuring Cisco EnergyWise
Managing Single Entities
Automatically Managing Power (Recurrence)
Beginning in privileged EXEC mode:
Step 4 energywise keywords word,word,... (Optional) Assign at least one keyword for the port.
When assigning multiple keywords, separate the keywords with
commas, and do not use spaces between keywords.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
By default, no keywords are defined.
Step 5 energywise name name (Optional) Specify the EnergyWise-specific port name.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
The default is a short version of the port name; for example,
Gi1.0.2 for Gigabit Ethernet 1/0/2.
Step 6 energywise role role (Optional) Specify the role of the port in the domain. For
example, lobbyport.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
By default, the role is interface.
Step 7 end Return to privileged EXEC mode.
Step 8 show energywise domain
show energywise children
Verify your entries.
Step 9 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Command Purpose
Step 1 show energywise (Optional) Verify that EnergyWise is enabled.
Step 2 configure terminal Enter global configuration mode.