Dell POWEREDGE M1000E - Manual (Page 30)

Contents
xxx
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Configuring Auto-QoS 36-20
Generated Auto-QoS Configuration 36-21
Effects of Auto-QoS on the Configuration 36-25
Auto-QoS Configuration Guidelines 36-25
Enabling Auto-QoS for VoIP 36-26
Auto-QoS Configuration Example 36-27
Displaying Auto-QoS Information 36-29
Configuring Standard QoS 36-29
Default Standard QoS Configuration 36-30
Default Ingress Queue Configuration 36-30
Default Egress Queue Configuration 36-31
Default Mapping Table Configuration 36-32
Standard QoS Configuration Guidelines 36-32
QoS ACL Guidelines 36-32
Applying QoS on Interfaces 36-32
Policing Guidelines 36-33
General QoS Guidelines 36-33
Enabling QoS Globally 36-34
Enabling VLAN-Based QoS on Physical Ports 36-34
Configuring Classification Using Port Trust States 36-35
Configuring the Trust State on Ports within the QoS Domain 36-35
Configuring the CoS Value for an Interface 36-37
Configuring a Trusted Boundary to Ensure Port Security 36-38
Enabling DSCP Transparency Mode 36-39
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain 36-40
Configuring a QoS Policy 36-42
Classifying Traffic by Using ACLs 36-43
Classifying Traffic by Using Class Maps 36-46
Classifying, Policing, and Marking Traffic on Physical Ports by Using Policy Maps 36-48
Classifying, Policing, and Marking Traffic on SVIs by Using Hierarchical Policy Maps 36-52
Classifying, Policing, and Marking Traffic by Using Aggregate Policers 36-58
Configuring DSCP Maps 36-60
Configuring the CoS-to-DSCP Map 36-60
Configuring the IP-Precedence-to-DSCP Map 36-61
Configuring the Policed-DSCP Map 36-62
Configuring the DSCP-to-CoS Map 36-63
Configuring the DSCP-to-DSCP-Mutation Map 36-64
Configuring Ingress Queue Characteristics 36-66
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 36-67
Allocating Buffer Space Between the Ingress Queues 36-68