Dell POWEREDGE M1000E User Manual

Page 166

6-24

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide

OL-13270-03

Chapter 6 Managing Switch Stacks

Configuring the Switch Stack

Beginning in privileged EXEC mode, follow these steps to assign a member number to a stack member.
This procedure is optional.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

switch current-stack-member-number
renumber new-stack-member-number

Specify the current stack member number and the new stack member
number for the stack member. The range is 1 to 9.

You can display the current stack member number by using the show
switch user EXEC command.

Step 3

end

Return to privileged EXEC mode.

Step 4

reload slot stack-member-number

Reset the stack member.

Step 5

show switch

Verify the stack member number.

Step 6

copy running-config startup-config

Save your entries in the configuration file.