Cabletron Systems CSMIM-T1 - Manual (Page 96)

Chapter 5: Troubleshooting Procedures
5-12 CSMIM-T1 Hardware Installation Guide
Table 5-7 Errors from Last Read Request
Table 5-8 Errors from Last Open Request
Error Description
Msgs with wrong size The correct host responded to the Read Request, but
the data size is incorrect.
ERPC layer errors See Table 5-6 .
Aborts rx’d The host’s BFS transmitted an abort in response to the
CSMIM-T1’s
Read Request. Run erpcd –D on the host
to obtain more information.
Error Description
ARP errors Address Resolution Protocol (ARP) errors indicate that the
CSMIM-T1 is configured to boot from a specified host, but
the host would not transmit its Ethernet address to the
CSMIM-T1. Possibly, the CSMIM-T1 configuration
includes the wrong IP encapsulation.
ERPC layer errors See Table 5-6
Aborts rx’d The host’s BFS transmitted an abort in response to the
CSMIM-T1’s
Open Request. This often means that the
requested file does not exist on that server. Run erpcd –D
on the host to obtain more information.