Cabletron Systems CSMIM-T1 - Manual (Page 13)

CSMIM-T1 Hardware Installation Guide 1-1
CHAPTER 1
INTRODUCTION
1.1 GENERAL
Welcome to the Cabletron Systems’ CSMIM-T1 Hardware Installation
Guide . This guide provides procedures for the installation of the
CSMIM-T1 into the Cabletron Systems Multi Media Access Center
(MMAC), as well as information on configuring your communications
server to load its operational software. Please read through this manual to
familiarize yourself with the content and to gain an understanding of the
features of the product.
This manual assumes that you have some understanding of networking,
remote access, T1, and telephony technology.
Please note that this manual covers installation and initial configuration
instructions only. Software instructions are provided in the
document set
provided with the software package.
This guide provides instructions for installation and testing of the
CSMIM-T1. ROM monitor commands, troubleshooting and diagnostic
procedures are also provided.
1.2 ORGANIZATION OF THIS DOCUMENT
• Chapter 1, Introduction, describes the hardware features and
firmware functions.
• Chapter 2, Installing the CSMIM-T1, provides installation, power
up, and booting procedures.
• Chapter 3, ROM Monitor Commands, describes the ROM Monitor
commands that modify specific configuration parameters, perform
diagnostic tests, and load the operational code.
• Chapter 4, CSMIM-T1 Parameters, provides T1-specific commands
and parameters.