Cabletron Systems CSMIM-T1 - Manual (Page 67)

Commands
CSMIM-T1 Hardware Installation Guide 3-25
3.2.17 stats
The stats command displays current network statistics gathered by the
ROM. Use stats along with the boot command to help isolate problems.
Table 3-3 describes the network statistics displayed by the stats
command. The syntax is:
stats [-slip]
The stats command display looks like this:
Table 3-3 .Network Statistics
Statistic Description
Frames Received The number of frames received.
CRC Errors The number of CRC checksum errors detected.
Alignment Errors
The number of frames received misaligned with a CRC
error.
Resource Drops
The number of packets dropped because the ROM
code could not buffer them quickly enough. The ROM
code cannot always handle back-to-back incoming
packets. The CSMIM-T1 accepts the first response it
receives and drops all others. Dropped packets are
normal.
Bus Wait Drops
The number of packets dropped due to waiting too
long for a bus to become available.
monitor:: stats
Ethernet Statistics
Frames Received: 398 Frames Sent: 3
CRC Errors: 0 Carrier Sense Losses: 0
Alignment Errors: 0 Clear to Send Losses: 0
Resource Drops: 0 Collisions Detected: 0
Bus Wait Drops: 0 Excessive Collision Losses 0
Bad Types/Lengths: 0