Cabletron Systems CSMIM-T1 - Manual (Page 27)

CSMIM-T1 Hardware Installation Guide 2-1
CHAPTER 2
INSTALLING THE CSMIM-T1
2.1 GENERAL
This chapter details the installation and set up procedures for the
CSMIM-T1.
Installing the CSMIM-T1 involves setting jumpers to select an Ethernet
channel, the installation of the CSMIM-T1 into the MMAC chassis,
connecting devices, performing power-up and testing, installing
operational software, and booting procedures. To configure the
CSMIM-T1, you will need a cable and connector pinned out as shown in
Appendix A for the Console Port, and an ASCII terminal or terminal
emulation software.
!
CAUTION
The CSMIM-T1 is sensitive to static discharge. Follow static
safety handling rules and properly wear an antistatic wrist
strap.