Adding a new server – Acronis Access Advanced - User Guide User Manual

Page 16

2. Add Server button

– used to add a new server to the Servers list. For more information see

Adding a New Server.

Adding a New Server

Servers must be added to the Access Mobile Client application before you can connect to them. It is
possible that you already have servers listed that were configured automatically by your Acronis
Access management server.

Note: Depending on the IT policy settings, the Access Mobile Client application user may be limited to only
connect to specific preassigned servers.

To add a server:

1. Tap the Add Server "+" button.
2. Select the Server Name or IP Address field and enter the Server address. You can enter the

server DNS name or IP address.

3. Set the optional Display Name if you would like the server to appear in the server list with a

name other than its Server Name or IP Address.

4. Enter the Username used to connect to the server.
5. If you would like to save your password so you don't have to enter it every time you connect,

turn Save Password to ON.