Canon mp280 - Manual (Page 635)

Advanced Guide > Troubleshooting > FINE Cartridge Holder Does Not Move to the Position for Replacing
U325
FINE Cartridge Holder Does Not Move to the Position for
Replacing
Check 1: Is the POWER lamp off?
Check if the POWER lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the POWER lamp is off, close the
Scanning Unit (Cover) and turn the machine on.
While the POWER lamp is flashing green, the machine is initializing. Wait until the POWER lamp
stops flashing and remains lit green, and then open the Scanning Unit (Cover) again.
Check 2: Is an error code displayed on the LED?
Close the Scanning Unit (Cover), confirm the error code is displayed, take the appropriate action to
resolve the error, and then reopen it. For details on how to resolve the error, see
An Error Code Is
Displayed on the LED .
Check 3: Has the Scanning Unit (Cover) been left open for 10 minutes or
longer?
If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves
to the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Cover) to
return the FINE Cartridge Holder to the position for replacing.
Check 4: Has the machine been printing continuously for a long
period?
Close the Scanning Unit (Cover), wait a while, then reopen it.
If the machine has been printing continuously for a long time, the FINE Cartridge Holder may not
move to the position for replacing since the Print Head may overheat.
Note
Opening the Scanning Unit (Cover) while printing moves the FINE Cartridge Holder to the right.
Close the Scanning Unit (Cover), and reopen it after printing is complete.
Page top
Page 635 of 707 pages FINE Cartridge Holder Does Not Move to the Position for Replacing