Canon mp280 - Manual (Page 608)

align the Print Head on the printer
driver.
Aligning the Print Head Position
POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately
When the POWER and Alarm lamps flash alternately as shown below, and the error code as
follows is displayed on the LED, an error requiring servicing might have occurred.
Error Code Action
P, 0, 2
(LED display)
Cancel printing, turn off the machine. Then
clear the jammed paper or protective material
that is preventing the FINE Cartridge Holder
from moving, and turn on the machine again.
Important
Be careful not to touch the components
inside the machine. The machine may not
print out properly if you touch it.
If the problem is not resolved, contact the
service center.
P, 1, 0
(LED display)
Turn off the machine, and unplug the power
cord of the machine from the power supply.
Contact the service center.
Other cases than above: Turn off the machine, and unplug the power
cord of the machine from the power supply.
Plug the machine back in and turn the machine
back on.
If the problem is not resolved, contact the
service center.
Page top
Page 608 of 707 pages An Error Code Is Displayed on the LED