Canon mp280 - Manual (Page 604)

Advanced Guide > Troubleshooting > The Machine Cannot Be Powered On
U303
The Machine Cannot Be Powered On
Check 1: Press the ON button.
Check 2: Make sure that the power plug is securely plugged into the
Power Cord Connector of the machine, then turn it back on.
Check 3: Unplug the machine from the power supply, then plug the
machine back in and turn the machine back on after leaving it for at
least 2 minutes.
If the problem is not resolved, contact the service center.
Page top
Page 604 of 707 pages The Machine Cannot Be Powered On