Canon mp280 - Manual (Page 323)

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Reducing or Enlarging a Copy
U033
Reducing or Enlarging a Copy
The Fit-to-Page copy function enables you to copy the original automatically enlarged or reduced to fit the
selected page size.
Note
You can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11" (Letter)
regardless of the size indicated on the Operation Panel.
Switching the Page Size between A4 and Letter
1. Make sure that the machine is turned on.
2. Load the plain paper on the Rear Tray.
3. Load the original on the Platen Glass.
4. Press the Paper button repeatedly to select the page size and media type according
to the paper loaded in step 2.
Note
When the plain paper is selected for the media type, the original is copied with borders. When
the photo paper is selected for the media type, the original is copied without borders and fills
the entire page.
5. Press the Fit to Page button.
The Fit to Page lamp lights up.
Note
To cancel Fit to Page copying, press the Fit to Page button again. When pressing the Fit to
Page button, the Fit to Page lamp is off and the Fit to Page copying is canceled.
You can use the Fit to Page button only when you are using the copy function.
6. Specify the number of copies (max. 20 copies).
To make 1 to 9 copies or 20 copies
Display the desired number of copies on the LED. Each time you press the + button, the number on
the LED increases by one.
When the LED displays as follows, the number of copies is set to "20". Press the + button again to
return to "1".
To make 10 to 19 copies
1. Press the + button repeatedly until the LED displays as follows.
2. Load only the desired number of sheets to copy.
Note
Pressing the Stop/Reset button returns the number of copies to 1.
Page 323 of 707 pages Reducing or Enlarging a Copy