Canon mp280 - Manual (Page 606)

(LED display)
installed in the correct
position. is installed in the correct position.
Routine Maintenance
E, 0, 8
(LED display)
Ink absorber is almost full. Press the machine's Black or Color
button to continue printing. Contact
the service center.
E, 1, 3
(LED display)
The remaining ink level
cannot be detected. The ink may have run out.
The function for detecting the
remaining ink level will be disabled
since the ink level cannot be correctly
detected.
If you want to continue printing
without this function, press the
machine's
Stop ( Reset ) button for at
least 5 seconds.
Canon recommends to use new
genuine Canon cartridges in order to
obtain optimum qualities.
Please be advised that Canon shall
not be liable for any malfunction or
trouble caused by continuation of
printing under the ink out condition.
E, 1, 4
(LED display)
The FINE Cartridge cannot
be recognized. The FINE Cartridge may not be
compatible with this printer.
Install the appropriate FINE
Cartridge.
Routine Maintenance
E, 1, 5
(LED display)
The FINE Cartridge cannot
be recognized. The FINE Cartridge may not be
installed properly.
Open the Scanning Unit (Cover) and
install the FINE Cartridge properly.
Routine Maintenance
Page 606 of 707 pages An Error Code Is Displayed on the LED