Canon mp280 - Manual (Page 337)

Scanning starts and the images are forwarded to the computer according to the settings specified in
MP Navigator EX.
Remove the original on the Platen Glass after scanning is complete.
4. Specify MP Navigator EX 4.0
If you are using Windows 7 or Windows Vista:
The program selection screen may be displayed after pressing the SCAN button. In this case, select
MP Navigator EX Ver4.0 and click OK.
You can set MP Navigator EX to launch whenever pressing the SCAN button. For details, see For
Windows Users .
If you are using Windows XP:
The program selection screen may be displayed after pressing the SCAN button for the first time. In
this case, specify MP Navigator EX Ver4.0 as the application software to use, select Always use this
program for this action, then click OK. From the next time, MP Navigator EX is automatically started.
Important
The position or size of an image is not scanned correctly depending on the type of the original.
In this case, refer to
Scanning Photos and Documents to change the settings in Document
Type and Document Size of MP Navigator EX to match the original and scan it using MP
Navigator EX.
If you want to scan originals with advanced settings, or if you want to edit or print the
scanned images:
If you scan originals from a computer using MP Navigator EX, MP Navigator EX enables you to edit
the scanned images, such as optimizing or trimming.
In addition, you can edit or print the scanned images using the bundled application software to
make better use of them.
Let's Try Scanning
Note
You can use a WIA-compliant application software and the Control Panel (Windows XP only)
to scan originals with this machine.
For details, refer to
Other Scanning Methods .
If you want to convert a scanned document to text, refer to Editing Files .
Page top
Page 337 of 707 pages Forwarding Scanned Data to the Computer Using the Operation Panel of the ...