Cooper Instruments & Systems DFI INFINITY Digital Force Indicator/Controller - Manual (Page 75)

11.32.1 Block A (For G, P, R, W Commands)
This block has different data length depending on meter’s mode. It consists of eighteen (18) items and thirty
eight (38) bytes (76 ASCII characters) in the Batch mode as in Table 11.27; and nineteen (19) items and thirty
nine (39) bytes (78 ASCII characters) in the rate or square root modes as in Table 11.28.
Table 11.27. Block A For Batch Mode
ITEM (HEX)
SUFFIX
DESCRIPTION
BYTE NO. & ORDER
16 Total scale 1, 2, 3
15 Total offset 4, 5, 6
14 Total decimal point 7
13 Batch scale 8, 9, 10
12 Batch load 11, 12, 13
11 Batch decimal point 14
0D Configuration 4 15
0C Configuration 3 16, 17, 18
0B Configuration 2 19
0A Configuration 1 20
08 Lockout 3 21
07 Lockout 2 22
06 Lockout 1 23
05 Setpoint 5 value 24, 25, 26
04 Setpoint 4 value 27, 28, 29
03 Setpoint 3 value 30, 31, 32
02 Setpoint 2 value 33, 34, 35
01 Setpoint 1 value 36, 37, 38
Table 11.28. Block A For Rate and Square-root Modes
ITEM (HEX)
SUFFIX
DESCRIPTION
BYTE NO. & ORDER
16 Total scale 1, 2, 3
15 Total offset 4, 5, 6
14 Total decimal point 7
13 Rate scale 8, 9, 10
12 Rate offset 11, 12, 13
11 Rate decimal point 14
0E Average configuration 15
0D Configuration 4 16
0C Configuration 3 17, 18, 19
Configuration 2 20
0A Configuration 1 21
08 Lockout 3 22
07 Lockout 2 23
06 Lockout 1 24
05 Setpoint 5 value 25, 26, 27
04 Setpoint 4 value 28, 29, 30
03 Setpoint 3 value 31, 32, 33
02 Setpoint 2 value 34, 35, 36
01 Setpoint 1 value 37, 38, 39
0B
11.32.2 Block B For Batch Meter And Square-Root Meter
Block B has different data length depending on the Prefix Command.
a) Command Prefix: “G” or “P”. It consists 11 items, 17 bytes (34 ASCII characters) as in Table 11.29.
CF 125 INFINITY SC GUIDE 71 M1519/N/0605