Cooper Instruments & Systems DFI INFINITY Digital Force Indicator/Controller - Manual (Page 57)

Table 11.1. Lockouts
LOCKOUT FUNCTION CORRESPONDING ITEM
L1 CNF: LOCKOUT CONFIGURATION #1
L1C.1=0
=1 Unlocked
Locked Display of Setpoints 1 and 2 through
SETPTS button
=1
Unlocked
Locked Display of Setpoints 3 and 4 through
SETPTS button
L1C.3=0
=1 Unlocked
Locked Display of Setpoint 5 through SETPTS
button
L1C.4=0
=1 Unlocked
Locked Display of CNFG 1 parameter
L1C.5=0
=1 Unlocked
Locked Display of CNFG 2 parameter
L1C.6=0
=1 Unlocked
Locked Display of CNFG 3 parameter
L1C.7=0
=1 Unlocked
Locked Display of CNFG 4 parameter
L1C.8=0
=1 Unlocked
Locked Display of AVG.CNF parameter in Rate or
Sq Rt Modes
L2 CNF: LOCKOUT CONFIGURATION #2
L2C1=0
=1 Unlocked
Locked Display of IN.SC.OF parameter
L2C2=0
=1 Unlocked
Locked Display of OT.SC.OF parameter
L2C3=0
=1 Unlocked
Locked Display of RTE DP, RTE OF, RTE SC, BAT
DP, B LOAD, and BAT SC parameters
L2C4=0
=1 Unlocked
Locked Display of TOT DP, TOT OF, and TOT SC
parameters
L2C5=0
=1 Unlocked
Locked Display of AL TI parameter
L2C6=0
=1 Unlocked
Locked Display of BAUD, SER.CNF, DAT FT, BUS
FT, ADDRES, and SER TI
L2C7=0
=1 Unlocked
Locked Display of SET TI parameter
=1
Unlocked
Locked Display of GATE T parameter
L3 CNF: LOCKOUT CONFIGURATION #3
L3C.1=0
=1 Unlocked
Locked Display of RATE, SQ RT, and BATCH
through DISPLAY button in Run Mode
L3C.2=0
=1 Unlocked
Locked Display of AVG RT, and BAT NO through
DISPLAY button in Run Mode
L3C.3=0
=1 Unlocked
Locked Display of TOTAL through DISPLAY button
in Run Mode
L3C.4=0
=1 Unlocked
Locked Display of TIME through DISPLAY button in
Run Mode
L3C.5=0
=1 Unlocked
Locked Display of MODE parameter
L3C.6=0
=1 Unlocked
Locked Display of CAL VZ, CAL VS, CALmAZ, and
CALmAS parameters
L3C.7=0
=1 Unlocked
Locked EEPROM storage of changed settings
L3C.8=0
=1 Unlocked
Locked MENU button (disabled only with removal of
S1A)
L1C.2=0
L2C8=0
CF 125 INFINITY SC GUIDE 53 M1519/N/0605