Converge pro 840t (continued) – ClearOne Converge Pro User Manual
Page 261
appendix C: Specifications 257
Converge Pro 840T (continued)
ethernet
autoswitching with Quality of Connection (QoC)
10/100 Mbps ethernet network port
10/100 Mbps ethernet pC port
RJ-45 Connectors
rS-232
Serial Command protocol only (Console software not
supported on RS- 232 port)
dB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,
1 stop bit, no parity
Hardware flow control on (default)/off
USB
Version 2.0 compatible
Type: B-connector
Control/Status Ports
dB-25 female a/B (2)
inputs a/B: active low (pull to ground)
outputs a/B: open collector, 40 VdC max, 40 ma each
+3.3 VdC pins (2) (300 ma over-current protected)
Configuration & Administration Software
Converge™ Console
Power Input range
auto-adjusting
100–240 VaC; 50/60 Hz
Power Consumption
30 W Typical
Dimensions (L x D x H)
17.25” x 10.25” x 1.75”
43.8 x 26 x 4.5 cm
Weight
7.5 lbs/3.3375 kg unit weight
12 lbs/5.4kg shipping weight
operating Temperature
14° f/-10° C to 122° f/50° C ambient unit temperature
Approvals
See Appendix D: Compliance
aeS48-2005: aeS standard on interconnections —
Grounding and eMC practices — Shields of connectors
in audio equipment containing active circuitry (self
certified)
Part number
910-151-840 Converge pro 840T
4-Channel aeC Microphone Mixer with Telephone Hybrid and
10W amplifier
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•