ClearOne Converge Pro - Manual (Page 226)

222 Technical Services: 800-283-5936
FilTsel – Filter Select
This command turns on and off the filters.
Command Form : DEVICE FilTsel [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3, 5 (m, p)
node unsigned integer 1 Group 3 1 – 4
0xFF for all (*
text)
Group 5 1 – 15
0xFF for all (*
text)
Value unsigned integer 1 0 = off
1 = on
2 = Toggle
(null to query in text)
FloW – Flow Control
This command selects/reports the flow control of the serial port on the unit. Hardware flow control is implemented
using dTr and dSr.
Command Form : DEVICE FloW [Value]
argument Type size values Units
Value unsigned integer 4 0 = off
1 = on
2 = Toggle
(null to query in text)
Fmp – First Mic Priority Mode
This command selects/reports first mic priority mode.
Command Form : DEVICE Fmp [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 4 (G)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
FpGaveR – FPGA Version
This command reports the version of the FpGA code in the unit. This command is read only.
Command Form : DEVICE FpGaveR [Value]
argument Type size values Units
Value String 12 (Sent with a null in text)