ClearOne Converge Pro - Manual (Page 217)

Appendix A: Serial Commands 213
aGcseT – Automatic Gain Control Adjust
This command selects/reports the settings of the Automatic Gain Control.
Command Form : DEVICE aGcseT [Threshold Target Attack Gain]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 1, 3, 7 (i, m, l)
Threshold Signed integer 1 -50 – 0
(null to query in text) dB
Target Signed integer 1 -30 – 20 dB
response
Time unsigned Float 2 0.10 – 10.00 S
Gain unsigned Float 2 0.00 – 18.00 dB
amblvl – Ambient Level Adjust
This command selects/reports the ambient level.
Command Form : DEVICE amblvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value Signed Float 2 -80.00 – 0.00
(null to query in text) dB
amXdUeT – Use AMX Duet Discovery
This command sets and reports the status of Amx duet discovery.
Command Form : DEVICE amXdUeT [Value]
argument Type size values Units
Value unsigned integer 4 0 = off
1 = on
2 = toggle
(null to query in text)
aUdiomasTeR – Expansion Bus Audio Master Mode
This command reports the mode of the unit for control of the expansion bus audio.
Command Form : DEVICE aUdiomasTeR [Value]
argument Type size values Units
Value unsigned integer 4 1 = master
2 = Slave
(null to query in text)
baUd – Baud Rate
This command selects/reports the baud rate of the serial port.
Command Form : DEVICE baUd [Value]
argument Type size values Units
Value unsigned integer 4 9600, 19200, 38400, 57600, 115200
(null to query in text)