ClearOne Converge Pro - Manual (Page 222)

218 Technical Services: 800-283-5936
deviceType – Sets the Type of a Connected Device
This command enables / disables or reports the current type of device connected to an input or output.
Command Form : DEVICE deviceType [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 1, 2, 3, 7 (i, o, m, l)
Value unsigned integer 2 (null to query in text)
dFlTm – Default Meter
This command selects/reports the setting of the default meter on the front panel.
Command Form : DEVICE dFlTm [Channel Group position]
argument Type size values Units
Channel Channel 1 See Groups and channels
(null to query in text)
Group Group 1 1, 2, 3, 7, 16, 17 (i, o, m, l, T, r)
position meter Type 2 1 – 4, as applicable for group
See meter Type definitions
dial – DTMF Dialing
This command dials a dTmF sequence or reports back the last sequence dialed.
Command Form : DEVICE dial [number]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
reserved 2 0
number String 40 1 – 40 Chars of ‘0’ – ‘9’, ‘A’ – ‘d’, ‘*’, ‘#’, ‘,’
(null to query last number dialed in text)
did – Device ID
This command reports the device id. This command is read only except through the front panel.
Command Form : DEVICE did [Value]
argument Type size values Units
Value unsigned integer 4 See Type and device ids
(null sent in text, Value returned)
dspveR – DSP Version
This command reports the version of the dSp code in the unit. This command is read only.
Command Form : DEVICE dspveR [Time/date]
argument Type size values Units
Value unsigned integer 4 0 for Host
1 – 8 for Satellite
9 for Telco
Time / date String 16 (null to query in text)