ClearOne Converge Pro - Manual (Page 223)

Appendix A: Serial Commands 219
dTmFlvl – DTMF Tone Level
This command selects/reports the dTmF tone level.
Command Form : DEVICE dTmFlvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value Signed Float 2 -12.00 – 12.00
(null to query in text) dB
dTonelvl – Dial Tone Level
This command selects/reports the audible dial tone level.
Command Form : DEVICE dTonelvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value Signed Float 2 -12.00 – 12.00
(null to query in text) dB
dUpdaTe – Download Update
This command reports the status of download updates.
Command Form : DEVICE dUpdaTe [Channel Group Status percent done message]
argument Type size values Units
Channel unsigned integer 1
Group unsigned integer 1
Status unsigned integer 1 (null to query in text)
percent done unsigned integer 1
message Char 60
dveR – Command Dictionary Version
This command reports the version of the command dictionary being used by the unit. This command is read
only.
Command Form : DEVICE dveR [Value]
argument Type size values Units
Value unsigned integer 4 (Sent with a null in text)
eneTaddR – Ethernet Port IP Address
This command selects/reports the ip address of the ethernet port on the unit.
Command Form : DEVICE eneTaddR [Value]
argument Type size values Units
Value ip Address 4 (null to query in text)