ClearOne Converge Pro - Manual (Page 214)

210 Technical Services: 800-283-5936
seRial commands
Serial commands are shown in bold, followed by the command form and argument details.
aa – Auto Answer Enable / Disable
This command selects/reports the setting of auto answer.
Command Form : DEVICE aa [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
aamb – Adaptive Ambient Mode
This command selects/reports the setting of adaptive ambient.
Command Form : DEVICE aamb [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
aaRinGs – Number of Rings to Auto Answer On
This command selects/reports the setting of the number of rings to auto answer.
Command Form : DEVICE aaRinGs [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 2 - 4
(null to query in text)
aconn – Audible Connect / Disconnect Indication
This command selects/reports the status of the audible connect / disconnect indication.
Command Form : DEVICE aconn [Value].
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)