ClearOne Converge Pro - Manual (Page 228)

224 Technical Services: 800-283-5936
GoveR – Gating Override
This command selects/reports the setting of gating override.
Command Form : DEVICE GoveR [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
GpiosTaTUs – General Purpose Status
This command sets the state of a General purpose Status pin.
Command Form : DEVICE GpiosTaTUs pin port [Value]
argument Type size values Units
pin unsigned
integer 1 1 – 24 (only user definable status pins.
port unsigned
integer 1 1 – 2
Value unsigned
integer 2 0 = High
1 = low
2 = Toggle
(null to query in text)
GRaTio – Gate Ratio Adjust
This command selects/reports the setting of the gate ratio.
Command Form : DEVICE GRaTio [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 – 50
(null to query in text) dB
GRepoRT – Gate Report
This command selects/reports the mode of gate and audio presence status reporting.
Command Form : DEVICE GRepoRT [Value]
argument Type size values Units
Value unsigned integer 4 0 = off
1 = on
2 = Toggle
(null to query in text)