ClearOne Converge Pro - Manual (Page 245)

Appendix A: Serial Commands 241
snmpWRiTecomm – SNMP Write Community String
This command selects/reports the Snmp Write Community String.
Command Form : DEVICE snmpWRiTecomm [Value]
argument Type size values Units
Value String 30 Write Community validation string (SeT data)
(null to query in text: default = “private”)
speeddial – Speed Dial a Number
This command dials a speed dial number.
Command Form : DEVICE speeddial [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 1 – 20
(null to query in text)
sTRinG – String Execution
This command sends the specified string out the serial port.
Command Form : DEVICE sTRinG [id]
argument Type size values Units
id unsigned integer 4 0 – 7
(null to query last string in text)
syschecKs – System Checks
initiates the system checks. There is no query for this command.
The system check integer bits determine which tests are run. each bit set generates a separate SYSreSulT
response.
CommanD Form : DEVICE syschecKs
argument Type size values
System
Check Hexadecimal
integer 4 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
network
Telephone
mic 1
mic 2
mic 3
mic 4
mic 5
mic 6
mic 7
mic 8
All other bits reserved