ClearOne Converge Pro - Manual (Page 247)

Appendix A: Serial Commands 243
Te – Telco Enable
This command selects/reports the hook status.
Command Form : DEVICE Te [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
TelcolvlcTRl – Telco RX Level Control Enable / Disable
This command selects/reports the setting of Telco rx level control.
Command Form : DEVICE TelcolvlcTRl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (T)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
Timelocale – Time Locale Settings
This command sets or reports the time locale settings.
Command Form : DEVICE Timelocale [daylightSavings TimeZone TimeZonename]
argument Type size values Units
daylight Savings unsigned integer 4 0 = do not use daylight Savings
1 = use daylight Savings
(null to Query in Text)
Time Zone unsigned integer 4 The number of seconds from udT. (-86400
– 86400)
Time Zone
Argument String 32 description of time zone
ToUT – Time Out Select
This command selects/reports the inactivity time out before returning to the unit title screen on the front panel.
Command Form : DEVICE ToUT [Value]
argument Type size values Units
Value unsigned integer 4 0 = no Time out
1 – 15
(null to query in text) min
UclocK – Clock Set by UDT Coordinates
This command sets or reports the current time.
Command Form : DEVICE UclocK [udT time]
argument Type size values Units
udT time unsigned integer 4